Chat with us, powered by LiveChat
(+45) 41 40 30 30 info@n-lock.com
NEED HELP WITH YOUR ORDER? DO NOT HESITATE TO CONTACT US!

Standard for standard handlebars 25.4 mm (401)

Standard for standard handlebars 25.4 mm (401)

127.00$

WOOCS 2.2.6

N-Lock 401 plus standard

This lock does not only protect bicycles against theft, but also improves the way of storing and transporting your bicycle – N-lock is the solution.
When the lock is activated, the handlebar can be rotated 180º without the front wheel following. This makes the bike impossible to drive.
The 400 series makes it possible to use a heavy wire and put it through the front wheel of the bike, bicycle stand, tree, post or other solid object. The wire is then inserted into the bottom of the N-Lock, and when the knob is turned, the wire is locked with the N-Lock.

Ahead, for cable inside, handlebar 25.4mm (Standard)

  • Cable not included
  • Perfect for city bikes and trekking
  • Saves 42% of space, when parked.

ADDITIONAL INFO

Installation:
It is possible to mount N-Lock on most types of bicycles – and it takes less than 5 minutes. While installation is simple, we recommend having it done by a bicycle specialist to ensure your safety.
Some bicycles with quill-type headsets needs an adaptor. Both 22.2mm and 25.4mm sizes are available.
Please note the number of your key set and keep it on a safe place.

Ride:
In riding position, the key remains inserted (like on most vehicles) and the safety knob is set forward to ‘ride’.

Park:
First, turn the safety knob completely to the left (counterclockwise). Do this with your left hand. Only when the knob in completely at the left, the key can be turned a half turn counterclockwise to the ‘park’ position. Now, the key has to be removed. The handlebar is now N-Locked and the bicycle cannot be used.

Ride again:
Insert the key with the little point downwards and turn it in a half circle clockwise to the ‘ride’ position. Now rotate the handlebar to the direction of the wheel. It will snap in automatically when handlebar and front wheel are aligned. Now the safety knob will automatically go into the ‘ride’ position and face forward. Only when the knob faces ‘ride’, it is safe to ride the bicycle. To ensure that the handlebar is locked, push the knob slightly to the right.

Maintenance:
Do not use a high pressure cleaner. A wet towel is sufficient for cleaning your N-Lock.
Once a year, it is recommended to have all moving parts of the bicycle greased or oiled, including N-Lock.

Troubleshooting:
1. The key cannot be turned or removed for parking: The safety knob is not turned left properly.
2. The key cannot be removed for riding: The key must remain inserted for riding. It is an additional safety feature to see the key.
3. The safety knob does not go into ride position after turning the key into ride position: Turn the knob to the left and move the handlebar at the same time. Then release the knob.

OTHER PRODUCTS